dcsimg
Image of Black Cottonwood
Life » » Plants » » Dicotyledons » » Willow Family »

Black Cottonwood

Populus balsamifera subsp. trichocarpa (Torr. & Gray) Brayshaw

Associations

provided by BioImages, the virtual fieldguide, UK
In Great Britain and/or Ireland:
Foodplant / spot causer
mostly hypophyllous uredium of Melampsora allii-populina causes spots on live leaf of Populus trichocarpa

Plant / resting place / within
epiphyllous, subepidermal, grouped, confluent telium of Melampsora laricis-populina may be found in dead, fallen leaf of Populus trichocarpa

Foodplant / parasite
Uncinula adunca var. adunca parasitises Populus trichocarpa

Foodplant / open feeder
adult of Zeugophora subspinosa grazes on leaf of sapling of Populus trichocarpa
Remarks: season: mid 8-9,5-12

license
cc-by-nc-sa-3.0
copyright
BioImages
project
BioImages

Associated Forest Cover

provided by Silvics of North America
Black cottonwood often forms extensive stands on alluvial sites at low elevations along the Pacific coast. Arborescent willows are its major associates in two cover types (3): Black Cottonwood-Willow (Society of American Foresters Type 222) and Cottonwood-Willow (Type 235). In the latter type, balsam poplar (Populus balsamifera) is the dominant cottonwood. Major willow species are Pacific (Salix lasiandra), northwest (S. sessilifolia), river (S. fluviatilis), and Scouler (S. scouleriana) willow (4). In other coastal forests, black cottonwood grows in mixture with red alder (Alnus rubra), Douglas-fir (Pseudotsuga menziesii), western hemlock (Tsuga heterophylla), western redcedar (Thuja plicata), Sitka spruce (Picea sitchensis), grand fir (Abies grandis), bigleaf maple (Acer macrophyllum), Oregon ash (Fraxinus latifolia), black hawthorn (Crataegus douglasii), and several birch (Betula spp.) and cherry (Prunus spp.) species. Associates in interior forests may include western white pine (Pinus monticola), ponderosa pine (P. ponderosa), white fir (Abies concolor), western larch (Larix occidentalis), subalpine fir (A. lasiocarpa), white spruce (Picea glauca), Engelmann spruce (P. engelmannii), and quaking aspen (Populus tremuloides).

Shrub species associated with black cottonwood include vine maple (Acer circinatum), red-osier dogwood (Cornus stolonifera) and other Cornus spp., beaked hazel (Corylus cornuta), Nootka rose (Rosa nutkana), thimbleberry (Rubus parviflorus), salmonberry (R. spectabilis), elder (Sambucus spp.), bearberry honeysuckle (Lonicera involucrata), spirea (Spiraea spp.), and common snowberry (Symphoricarpos albus).

Herbaceous associates include swordfern (Polystichum munitum), lady fern (Athyrium filix-femina), horsetail (Equisetum spp.), stinging nettle (Urtica dioica), hedge nettle (Stachys spp.), false solomons-seal (Smilacina stellata), Canada violet (Viola canadensis), jewelweed (Impatiens spp.), enchanters nightshade (Circaea alpina), golden-saxifrage (Chrysosplenium spp.), buttercup (Ranunculus spp.), bittercress (Cardamine spp.), angelica (Angelica spp.), loosestrife (Lysimachia spp.), bedstraw (Galium spp.), and iris (Iris spp.).

Presence of some of these understory species provides an indication of site quality in British Columbia (27). Good black cottonwood sites are characterized by salmonberry, nettles, swordfern, and lady fern, as well as vigorous growth of beaked hazel and elder. On medium sites, red-osier dogwood, bearberry honeysuckle, common snowberry, and sometimes thimbleberry and Nootka rose are common. Poor sites are commonly subject to prolonged flooding, and horsetails are dominant.

license
cc-by-nc
copyright
USDA, Forest Service
original
visit source
partner site
Silvics of North America

Climate

provided by Silvics of North America
Populations of black cottonwood grow in climates varying from relatively and to humid, but best growth is attained in the humid coastal forests of the Pacific Northwest (23). Annual precipitation ranges from 250 min (10 in) to more than 3050 min (120 in). Only about one-third of the annual precipitation occurs during the growing season, and in mountainous and inland areas much of the dormant-season precipitation falls as snow. The frost-free period ranges from about 70 days in the interior areas to more than 260 days in southern California. Maximum temperatures range from 16° to 47° C (60° to 117° F); minimum temperatures, from 0° to –47° C (32° to –53° F).

license
cc-by-nc
copyright
USDA, Forest Service
original
visit source
partner site
Silvics of North America

Damaging Agents

provided by Silvics of North America
Young saplings are frequently injured and sometimes killed by unseasonably early or late frosts (23). Frost cracks also lower quality of wood and provide an entrance for decay fungi (30). Ice storms and heavy snowfall cause considerable breakage and permanent bending (29). Wind damage is common, especially in stands where black cottonwood trees are much taller than surrounding vegetation; top breakage and bending result. Erosion along rivers and major streams also takes its toll in adjacent black cottonwood stands. The species is highly susceptible to fire damage.

Mammals can create serious problems in black cottonwood plantations, especially at time of establishment or soon after. Meadow voles and meadow mice can cause severe losses in young plantations; such damage occurs most commonly on grassy or herb-covered sites. The voles feed on roots and sometimes girdle the lower stem. In some locations, rabbits and hares cause losses in young cottonwoods via clipping and basal girdling damage. Damage also results when beavers use cottonwood for food and construction of dams. Browsing and trampling of saplings by elk and deer sometimes decimate small, isolated plantings. Slugs have girdled cottonwood stems and presumably have eaten buds and newly emergent leaves of recently planted cuttings in the lower Columbia River valley.

Although several insects attack black cottonwood (5,17), none has yet been reported as a pest of economic significance. Foliar feeders include tent caterpillars (Malacosoma spp.), two sawflies (Phyllocolpa bozemani and Nematus currani), the satin moth (Leucoma salicis), and a leaf blotch miner (Agromyza albitarsis). Oystershell scale (Lepidosaphes u1mi) was reported as frequently killing twigs and branches, and sometimes a whole tree. A bud midge (Contarinia spp.) caused considerable injury to buds of stressed trees (e.g., nursery-grown trees that have been transplanted, and trees on dry sites or in dry years) (9). A small bark moth (Laspeyresia populana) mines the cambium of the trunk and larger branches. Two borers feed under the bark and in the wood, a flatheaded borer (Poecilonota montana) and the poplar- and-willow borer (Cryptorhynchus lapathi). The latter is a European insect that is now established throughout much of the range of black cottonwood and has caused some damage in cottonwood plantings. Other flatheaded and roundheaded borers and ambrosia beetles are known to destroy the wood of black cottonwood.

At least 70 fungal species cause decay in cottonwood, but only six fungi cause significant losses in British Columbia; two of these (Spongipellis delectans and Pholiota destruens) cause 92 percent of the loss (15,17,33). A leaf rust (Melampsora spp.) has been observed in young plantations, and susceptibility to the rust appears to vary greatly across the geographic range of the species. This disease limits photosynthesis and causes leaves to fall prematurely, thereby decreasing tree growth and vigor. Severe Melampsora infections have been observed when clonal material from relatively dry areas (e.g., east of the Cascade Range in Washington or Oregon and northern California) was planted in western Washington (9); in one instance, such infections resulted in death of the clones. Other foliage diseases include leaf-spot syndrome (Venturia populina) and yellow-leaf blister (Taphrina populisalicis). A deformity of catkins is caused by Taphrina johansonii. Cytospora canker (Cytospora chrysosperma) is widespread under forest conditions but rarely causes significant damage in vigorous cottonwood stands. It may cause problems, however, to cuttings in nurseries and plantations. Stem cankers in various areas have been reported as caused by Dothichiza populea, Fusarium spp., Hypoxylon mammatum, Nectria galligena, and Septoria musiva. None appear to be of great significance in management of black cottonwood, but severe attacks of a bacterial canker have reportedly limited planting of the species in Europe. Black cottonwood is also subject to the condition known as wet wood, which leads to wood collapse during drying.

license
cc-by-nc
copyright
USDA, Forest Service
original
visit source
partner site
Silvics of North America

Flowering and Fruiting

provided by Silvics of North America
Black cottonwood is normally dioecious; male and female catkins are borne on separate trees. The species reaches flowering age at about 10 years (25). Flowers may appear in early March to late May in Washington and Oregon, and sometimes as late as mid-June in northern and interior British Columbia, Idaho, and Montana. Staminate catkins contain 30 to 60 stamens, elongate to 2 to 3 cm (0.8 to 1.2 in), and are deciduous. Pistillate catkins at maturity are 8 to 20 ern (3.2 to 8 in) long with rotund-ovate, three carpellate subsessile fruits 5 to 8 min (0.20 to 0.32 in) long. Each capsule contains many minute seeds with long, white cottony hairs.

license
cc-by-nc
copyright
USDA, Forest Service
original
visit source
partner site
Silvics of North America

Genetics

provided by Silvics of North America
Population Differences Black cottonwood exhibits considerable variation throughout its range. Photoperiodic studies conducted under uniform environmental conditions in Massachusetts have shown that northern provenances cease growth earlier than southern provenances (21). Moreover, cessation of growth among clones from the same latitude was related to length of the growing season (frost-free days) at places of origin (that is, elevation). Another study (18) conducted with clones indicates that several aspects of shoot growth are under genetic control: date of flushing, amount of early growth, growth rate in midseason, date of cessation, and average length of internode. A more recent study (36) demonstrated a large range of variation in leaf, branch, and phenology characters in 50 clones (five each from 10 natural populations growing in drainages west of the Cascade Range). Population means for several characters varied clinally with source latitude, longitude, and/or elevation. In general, southwestern clones developed smaller leaves, had more numerous and more erect branches, and continued growth later in the fall than northeastern clones. Experiments in pots and flats have shown that some clones of black cottonwood grow taller in the presence of another clone than when planted by themselves (32).

Hybrids Black cottonwood hybridizes freely with balsam poplar (Populus balsamifera) where the ranges of the two species overlap (35). Another natural hybrid, the Parry cottonwood, resulting from crosses with P. fremontii is native to California. A hybrid (Populus x generosa Henry) between P. angulata (now considered either a variety or cultivar of P. deltoides) and R trichocarpa was developed in England (24). Also, P. maximowiczii x trichocarpa and P. deltoides x P. trichocarpa hybrids have been planted in the northeastern United States. Recent work in which P. trichocarpa was crossed with superior selections of P. deltoides from the southern United States has produced hybrids of markedly superior growth performance (12,31).

license
cc-by-nc
copyright
USDA, Forest Service
original
visit source
partner site
Silvics of North America

Growth and Yield

provided by Silvics of North America
Black cottonwood may attain pulpwood size in 10 to 15 years, and saw log-size trees have been observed in plantations less than 25 years old in British Columbia and Washington. For example, dominant and codominant trees of 17 cm (6.7 in) in d.b.h. and 14.8 m (48.5 ft) in height at 9 years have been reported for a good moist site (26). In the lower Fraser River Valley of British Columbia, planted black cottonwoods averaged 20 cm (8 in) in d.b.h. and 16.8 m (55 ft) in height at 10 years, and some individual trees were more than 30 ern (12 in) in d.b.h. and 21.3 m (70 ft) in height (29). Growth is considerably less in northerly and interior locations. In the Willamette Valley of Oregon, black cottonwood matures in 60 years or less (23), but studies in British Columbia show that the species grows well for as long as 200 years (33). Exceptional trees have attained 180 to 300 cm. (72 to 120 in) in d.b.h. and more than 60 m (200 ft) in height (7,35).

Growth and yield data for natural black cottonwood stands are available for the Quesnel region and Skeena River Valley of British Columbia (33). Other Canadian studies have indicated that three site quality classes developed for German poplar (16) are satisfactory for black cottonwood stands in British Columbia (30). The Forest Inventory Branch of the British Columbia Forest Service has collected much growth and yield data on natural stands of black cottonwood. Some of this information is summarized in table 1. These data clearly indicate that differences in yield among site classes are large; the mean annual production of site I is nearly twice that of site II, and more than three times that of site III.



Site class and stand age Average d.b.h. Stocking Height¹ Net volume Maximum mean annual increment Age of culmination yr cm trees/ha m m³/ha m³/ha yr I, 112 46 294 41.1 302.3 5.5 62 II, 101 33 415 29.6 219.9 2.8 78 II, 87 28 474 21.3 122.8 1.7 96 yr in trees/acre ft ft³/acre ft³/acre yr I, 112 18 119 135 4,319 79 62 II, 101 13 168 97 3,141 40 78 III, 87 11 192 70 1,755 24 96 ¹Dominants and codominants.

Yields from black cottonwood plantations are expected to be much higher than yields from natural stands. Data from three plantations in the lower Fraser River Valley indicate mean annual increments ranging from 10.5 to 15.4 m³/ha (150 to 220 ft³/acre) per year (28). A plantation established on a deep alluvial soil in coastal Washington has produced more than 500 m³/ha (7,242 ft³/acre) in 24 years (19). Dominant trees range from 35 to 37 m (115 to 122 ft) in height and 33 to 41 cm (13 to 16 in) in d.b.h.

license
cc-by-nc
copyright
USDA, Forest Service
original
visit source
partner site
Silvics of North America

Reaction to Competition

provided by Silvics of North America
Black cottonwood is classed as very intolerant of shade. It grows best in full sunlight. On moist lowland sites, it makes rapid initial growth and thereby survives competition from slower growing associated species.

Data from British Columbia indicate that black cottonwood trees can take advantage of wide initial spacing (1); diameters of trees and sets established at a 9.14-m (30-ft) spacing averaged 30 to 75 percent greater than those of plants established at a 1.82-m (6-ft) spacing (28,29). Results from a spacing trial in Washington, however, indicate better height and diameter growth at 3.7- by 3.7-m (12- by 12-ft) spacing than at 3.0- by 9.1-m (10- by 30-ft) and 6.1- by 9.1-m (20- by 30-ft) spacings (10). Black cottonwood responds well to thinning (29).

In the past decade, most of the research on black cottonwood has focused on use of the species in short-rotation, coppice systems for fiber and energy. Spacings have varied from 0.3 by 0.3 m (1 by 1 ft) to 1.8 by 1.8 m (6 by 6 ft) and rotations or cutting cycles of 2 to 8 years (8,11,12,14). Mean annual production has ranged from about 2 to more than 16 mg/ha (1 to 7 tons/acre). The most recent findings suggest that rotations longer than 4 years (perhaps 8 or more) result in highest mean annual production (11); with such rotations, spacings of 1.8 by 1.8 in (6 by 6 ft) or wider may be used, provided that competition from grass and weeds is controlled. Higher coppice yield was obtained in a mixed planting of black cottonwood and red alder (a nitrogen-fixing species) than from pure plantings of either species (2). A subsequent study of the black cottonwood-alder mixture on a better site showed no benefits after the second year, presumably because cottonwood shaded and overtopped alder and thus impaired nitrogen fixation (13).

license
cc-by-nc
copyright
USDA, Forest Service
original
visit source
partner site
Silvics of North America

Rooting Habit

provided by Silvics of North America
Planted cuttings of black cottonwood root very well; they produce deep and widespread root systems if growth is not restricted by adverse soil conditions. Little information on rooting has been collected in natural or seedling stands.

license
cc-by-nc
copyright
USDA, Forest Service
original
visit source
partner site
Silvics of North America

Seed Production and Dissemination

provided by Silvics of North America
The seed ripens and is disseminated by late May to late June in Oregon and Washington, but frequently not until mid-July in Idaho and Montana (23). Abundant seed crops are usually produced every year. Attached to its cotton, the seed is light and buoyant and can be transported long distances by wind and water. Although highly viable, longevity of black cottonwood seed under natural conditions may be as short as 2 weeks to a month. There is some evidence, however, to suggest a somewhat longer lifespan under apparently adverse conditions. With proper drying and cold storage, viability and capacity to germinate can be maintained for at least 1 year (25).

license
cc-by-nc
copyright
USDA, Forest Service
original
visit source
partner site
Silvics of North America

Seedling Development

provided by Silvics of North America
Moist seedbeds are essential for high germination (23), and seedling survival depends on continuously favorable conditions during the first month (25). Wet bottom lands of rivers and major streams frequently provide such conditions, particularly where bare soil has been exposed or new soil laid down. Germination is epigeal. Black cottonwood seedlings do not usually become established in abundance after logging unless special measures are taken to prepare the bare, moist seedbeds required for initial establishment (23). Where seedlings become established in great numbers, they thin out naturally by age 5 because the weaker seedlings of this shade-intolerant species are suppressed (23).

license
cc-by-nc
copyright
USDA, Forest Service
original
visit source
partner site
Silvics of North America

Soils and Topography

provided by Silvics of North America
Black cottonwood grows on a variety of soils and sites, from moist silts, sands, and gravels of islands and new river bars to rich humus soils, loams, and occasionally clay soils of upland sites (23). The most extensive black cottonwood stands are on soils of the order Entisols; the species also is common on Inceptisols and occasionally may be present on soils of other orders. High soil acidity (low pH) may restrict occurrence of black cottonwood on fine-textured soils where other site factors are favorable (9). Studies in British Columbia (27) have indicated that abundant moisture, nutrients, oxygen, and nearly neutral soil reaction (pH 6.0 to 7.0) are required for optimum production. Growth is best at low elevations on deep, moist alluvial soils, but some upland soils are productive cottonwood sites (27). The latter include loessial soils of high nutrient status in areas of abundant rainfall.

Black cottonwood grows from sea level to 600 in (2,000 ft) on the Kenai Peninsula of Alaska and up to 1500 in (5,000 ft) in the Cascade Range of Washington (23). In British Columbia, the elevation range extends to nearly 2100 m (7,000 ft) in the interior valleys of the Selkirk Range. In central and eastern Washington, as well as other dry areas, the species is usually limited to protected valleys and canyon bottoms, along stream banks and edges of ponds and meadows, and to moist toe slopes.

license
cc-by-nc
copyright
USDA, Forest Service
original
visit source
partner site
Silvics of North America

Special Uses

provided by Silvics of North America
Black cottonwood has been planted as windbreaks and shelterbelts in conjunction with irrigated agriculture in the Columbia River basin.

The wood of black cottonwood is similar to that of other cottonwoods (20,34). It has light color, straight grain, fine, even texture, and is light in weight. It dries easily, is moderately stable in use, and, although not strong, is tough for its weight.

Black cottonwood has short, fine fibers and is used to produce pulp for high-grade book and magazine papers. The species peels easily, and its veneer is used as core and cross-banding stock in plywood and in baskets and crates. The light weight, good nailing characteristics, and light color of the lumber are ideal for manufacture of pallets, boxes, and crates. The lumber is also used in concealed parts of furniture. Fiberboard and flakeboard are made from black cottonwood. In early days, it was used for cooperage.

license
cc-by-nc
copyright
USDA, Forest Service
original
visit source
partner site
Silvics of North America

Vegetative Reproduction

provided by Silvics of North America
Black cottonwood sprouts readily from stumps, and in one study, satisfactory coppice reproduction was obtained four times in 2-year cutting cycles (8). After logging operations, black cottonwoods sometimes regenerate naturally from rooting of partially buried fragments of branches (9). Sprouting from roots has also been reported (23). The species also has the unusual ability to abscise small shoots complete with green leaves (6). These shoots drop to the ground and may root where they fall or may be dispersed by water transport. In some situations, abscission may be one means of colonizing exposed sandbars.

The species is easily reproduced by rooted and unrooted cuttings (30). The cuttings are made in the dormant season and may be as short as 15 cm (6 in). Most research and small-scale operational plantings have been established with unrooted stem cuttings taken from 1- and 2-year-old wood, I to 3 em (0.4 to 1.2 in) in diameter at the small end and 40 to 60 cm (16 to 24 in) long. Good results have also been obtained with branchwood cuttings, in some instances collected from trees as old as 30 years (9). Usually the cuttings are planted in the spring to a depth of 80 to 40 em (12 to 16 in). Best establishment and growth are achieved when cuttings have healthy axillary buds, at least one of which remains above ground after planting (22). Plantings of very long cuttings (3 in or 10 ft or more in length) have sometimes been used successfully to overcome problems of weed competition or animal damage (29); in other cases, they have failed, presumably because top growth and thus transpiration stress outstripped root growth and the ability of the root system to provide moisture during the dry summer. The proportion of trees with poor form and the magnitude of crookedness are greater in trees established with long cuttings than with short cuttings (10). Height of trees established from cuttings has frequently exceeded 1.5 in (5 ft) at the end of the first year and 6 in (20 ft) after 4 years (11). Height growth rates of cottonwood sprouts have been even greater.

license
cc-by-nc
copyright
USDA, Forest Service
original
visit source
partner site
Silvics of North America

Distribution

provided by Silvics of North America
The range of black cottonwood extends northeast from Kodiak Island along Cook Inlet to latitude 62° 30° N., then southeast in southeast Alaska and British Columbia to the forested areas of Washington and Oregon, to the mountains in southern California and northern Baja California (lat. 31° N.). It is also found inland, generally on the west side of the Rocky Mountains, in British Columbia, western Alberta, western Montana, and northern Idaho. Scattered small populations have been noted in southeastern Alberta, eastern Montana, western North Dakota, western Wyoming, Utah, and Nevada.


-The native range of black cottonwood.


license
cc-by-nc
copyright
USDA, Forest Service
original
visit source
partner site
Silvics of North America

Brief Summary

provided by Silvics of North America
Salicaceae -- Willow family

Dean S. DeBell

Black cottonwood (Populus trichocarpa) is the largest of the American poplars and the largest hardwood tree in western North America. Known also as balsam cottonwood, western balsam poplar, and California poplar, it grows primarily on moist sites west of the Rocky Mountains. The most productive sites are the bottom lands of major streams and rivers west of the Cascade Range in the Pacific Northwest. Pure stands may form on alluvial soils. Black cottonwood is harvested and used for lumber, veneer, and fiber products. Many kinds of wildlife use the foliage, twigs, and buds for food, and the tree is planted for shade and in windbreaks and shelterbelts.

license
cc-by-nc
copyright
USDA, Forest Service
original
visit source
partner site
Silvics of North America

Populus trichocarpa

provided by wikipedia EN

Populus trichocarpa, the black cottonwood,[1] western balsam-poplar[2] or California poplar, is a deciduous broadleaf tree species native to western North America. It is used for timber, and is notable as a model organism in plant biology.

Description

It is a large tree, growing to a height of 30 to 50 metres (98 to 164 ft) and a trunk diameter over 2 m (6+12 ft), which makes it the largest poplar species in the Americas. It is normally fairly short-lived, but some trees may live up to 400 years.[3] A cottonwood in Willamette Mission State Park near Salem, Oregon, holds the national and world records. Last measured in April 2008, this black cottonwood was found to be standing at 47 m (155 ft) tall, 8.8 m (29 ft) around, with 527 points.[4][5][6][7]

The bark is grey and covered with lenticels, becoming thick and deeply fissured on old trees. The bark can become hard enough to cause sparks when cut with a chainsaw.[8] The stem is grey in the older parts and light brown in younger parts. The crown is usually roughly conical and quite dense. In large trees, the lower branches droop downwards. Spur shoots are common. The wood has a light coloring and a straight grain.

The leaves are usually 7–20 centimetres (2+347+34 in) long with a glossy, dark green upper side and glaucous, light grey-green underside; larger leaves may be up to 30 cm (11+34 in) long and may be produced on stump sprouts and very vigorous young trees. The leaves are alternate, elliptical with a crenate margin and an acute tip, and reticulate venation. The petiole is reddish. The buds are conical, long, narrow, and sticky, with a strong balsam scent in spring when they open.

P. trichocarpa has an extensive and aggressive root system, which can invade and damage drainage systems. Sometimes, the roots can even damage the foundations of buildings by drying out the soil.

emerging male catkins
female catkins opening

Reproduction

Flowering and fruiting

Male (pollen-producing) catkin and leaf buds in March. Sherwood, Oregon.

P. trichocarpa is normally dioecious; male and female catkins are borne on separate trees. The species reaches flowering age around 10 years. Flowers may appear in early March to late May in Washington and Oregon, and sometimes as late as mid-June in northern and interior British Columbia, Idaho, and Montana. Staminate catkins contain 30 to 60 stamens, elongated to 2 to 3 cm, and are deciduous. The pollen can be an allergen.[9][10] Pistillate catkins at maturity are 8 to 20 cm long with rotund-ovate, tricarpellate subsessile fruits 5 to 8 mm long. Each capsule contains many minute seeds with long, white, cottony hairs.

Seed production and dissemination

The seed ripens and is disseminated by late May to late June in Oregon and Washington, but frequently not until mid-July in Idaho and Montana. Abundant seed crops are usually produced every year. Attached to its cotton, the seed is light and buoyant and can be transported long distances by wind and water. Although highly viable, longevity of P. trichocarpa seed under natural conditions may be as short as two weeks to a month. This can be increased with cold storage.

Seeds and fluff of cottonwood in July. Boise, Idaho.

Seedling development

Moist seedbeds are essential for high germination, and seedling survival depends on continuously favorable conditions during the first month. Wet bottomlands of rivers and major streams frequently provide such conditions, particularly where bare soil has been exposed or new soil laid down. Germination is epigeal (above ground). P. trichocarpa seedlings do not usually become established in abundance after logging unless special measures are taken to prepare the bare, moist seedbeds required for initial establishment. Where seedlings become established in great numbers, they thin out naturally by age five because the weaker seedlings of this shade-intolerant species are suppressed.

Vegetative reproduction

Due to its high levels of rooting hormones, P. trichocarpa sprouts readily. After logging operations, it sometimes regenerates naturally from rooting of partially buried fragments of branches or from stumps. Sprouting from roots also occurs. The species also has the ability to abscise shoots complete with green leaves. These shoots drop to the ground and may root where they fall or may be dispersed by water transport. In some situations, abscission may be one means of colonizing exposed sandbars.

Taxonomy

"Trichocarpa" is Greek for "hairy fruits". These scientific names are now considered synonymous with P. trichocarpa:

  • P. balsamifera subsp. trichocarpa
  • P. balsamifera var. californica
  • P. hastata
  • P. trichocarpa subsp. hastata
  • P. trichocarpa var. hastata
  • P. trichocarpa var. cupulata
  • P. trichocarpa var. ingrata

Distribution and habitat

A large specimen in Diamond Ridge, Alaska, and the bark at its base

The native range of P. trichocarpa covers large sections of western North America. It extends from Southeast Alaska's Kodiak Island and Cook Inlet to latitude 62° 30° N., through British Columbia and the forested areas of Washington and Oregon, to the mountains in southern California and northern Baja California (31°N). It is also found inland, generally on the west side of the Rocky Mountains, in British Columbia, southwestern Alberta, western Montana, and north-to-central Idaho.[11] Scattered small populations have been noted in southeastern Alberta, eastern Montana, western North Dakota, western Wyoming, Utah, and Nevada.

Black cottonwood grows on alluvial sites, riparian habitats, and moist woods on mountain slopes, from sea level to elevations of 2,100–2,750 m (6,890–9,020 ft). It often forms extensive stands on bottomlands of major streams and rivers at low elevations along the Pacific Coast, west of the Cascade Range. In eastern Washington and other dry areas, it is restricted to protected valleys and canyon bottoms, along streambanks, and edges of ponds and meadows. It grows on a variety of soils from moist silts, gravels, and sands to rich humus, loams, and occasionally clays. Black cottonwood is a pioneer species that grows best in full sunlight and commonly establishes on recently disturbed alluvium. Seeds are numerous and widely dispersed because of their cottony tufts, enabling the species to colonize even burn sites, if conditions for establishment are met. Seral communities dominated or codominated by cottonwood are maintained by periodic flooding or other types of soil disturbance. Black cottonwood has low drought tolerance; it is flood-tolerant but cannot tolerate brackish water or stagnant pools.[1]

P. trichocarpa has been one of the most successful introductions of trees to the otherwise almost treeless Faroe Islands.

The species was imported from Alaska to Iceland in 1944 and has since become one of the most widespread trees in the country.

Ecology

Although the most populous cottonwood of the Pacific Northwest, it hybridizes with the region's three other species: balsam poplar, plains cottonwood, and narrowleaf cottonwood; all four have similar appearances and provide habitats for various animals.[11]

Cottonwoods are shade intolerant. Black cottonwood thrives by colonizing disturbed sites, but can be replaced by conifers.[11] The wood is relatively weak and waterlogged, often splitting during freezes.[11] It is susceptible to rot as well. Woodpeckers create cavities which various animals can use for nests. Larger birds nest in the large upper branches.[11] Beavers use the trees as food and dam-building material.[11]

Cultivation

It is grown as an ornamental tree, valued for its fast growth and scented foliage in spring, detectable from over 100 m distance. The roots are however invasive, and it can damage the foundations of buildings on shrinkable clay soils if planted nearby (Mitchel 1996).

Branches can be added to potted plants to stimulate rooting.[8]

Uses

The wood, roots and bark have been used for firewood, canoe making, rope, fish traps, baskets and structures. The gum-like sap was used as a glue or as waterproofing.[12] Native Americans consumed cottonwood inner bark and sap, feeding their horses the inner bark and foliage.[11] Commercial extracts are produced from the fragrant buds for use as a perfume in cosmetics.[8]

Lumber

P. trichocarpa wood is light-weight and although not particularly strong, is strong for its weight. The wood material has short, fine cellulose fibres that are used in pulp for high-quality book and magazine paper.[11] The wood is also excellent for production of plywood. Living trees are used as windbreaks.

This species grows very quickly; trees in plantations in Great Britain have reached 18 m (59 ft) tall in 11 years, and 34 m (112 ft) tall in 28 years.[13] It can reach suitable size for pulp production in 10–15 years and about 25 years for timber production.

As a model species

Populus trichocarpa has several qualities that makes it a good model species for trees:

  • Model genome size (although significantly larger than the other model plant, Arabidopsis thaliana)
  • Rapid growth (for a tree)
  • Reaches reproductive maturity 4–6 years
  • Economically important
  • It represents a phenotypically diverse genus

For these reasons, the species has been extensively studied. Its genome sequence was published in 2006[14] (see "Genome" below). More than 121,000 expressed sequence tags have been sequenced from it. The wide range of topics studied by using P. trichocarpa include the effects of ethylene, lignin biosynthesis, drought tolerance, and wood formation.

Genome

Characteristics

General information

The sequence of P. trichocarpa is that of an individual female specimen "Nisqually-1", named after the Nisqually River in Washington in the United States, where the specimen was collected. The sequencing was performed at the Joint Genome Institute using the shotgun method. The depth of the sequencing was about 7.5 x (meaning that each base pair was sequenced on average 7.5 times). Genome annotation was done primarily by the Joint Genome Institute, the Oak Ridge National Laboratory, the Umeå Plant Science Centre, and Genome Canada.

Prior to the publication of P. trichocarpa genome the only available plant genomes were those of thale cress and rice, both of which are herbaceous. P. trichocarpa is the first woody plant genome to be sequenced. Considering the economic importance of wood and wood products, the availability[15] of a tree genome was necessary. The sequence also allows evolutionary comparisons and the elucidation of basic molecular differences between herbaceous and woody plants.

Doty et al. (2016) found the first direct evidence of nitrogen fixation in the wild P. trichocarpa (a nonleguminous tree).[16]

Somatic mosaicism

Genome-wide analysis of 11 clumps of P. trichocarpa trees reveals significant genetic differences between the roots and the leaves and branches of the same tree. The variation within a specimen is as much as found between unrelated trees.[17] These results may be important in resolving debate in evolutionary biology regarding somatic mutation (that evolution can occur within individuals, not solely among populations), with a variety of implications.[18]

References

  1. ^ a b USDA, NRCS (n.d.). "Populus balsamifera subsp. trichocarpa". The PLANTS Database (plants.usda.gov). Greensboro, North Carolina: National Plant Data Team. Retrieved 31 January 2016.
  2. ^ BSBI List 2007 (xls). Botanical Society of Britain and Ireland. Archived from the original (xls) on 2015-06-26. Retrieved 2014-10-17.
  3. ^ Forbes 2006
  4. ^ "Ascending the Giants - Chronicles Of Measuring Champion Trees". Ascendingthegiants.com. Archived from the original on 2016-09-11. Retrieved 2016-07-03.
  5. ^ "Largest Black Cottonwood Tree in the United States - Marion County, Oregon - Exceptional Trees". Waymarking.com. Retrieved 2016-07-03.
  6. ^ "Willamette Mission Cottonwood - Oregon Travel Experience". Ortravelexperience.com. Retrieved 2016-07-03.
  7. ^ "Black cottonwood 'Willamette Mission Cottonwood' in Willamette Mission State Park in Salem". Monumentaltrees.com. Retrieved 2016-07-03.
  8. ^ a b c Ewing, Susan. The Great Alaska Nature Factbook. Portland: Alaska Northwest Books, 1996.
  9. ^ "Black Cottonwood" (PDF). Stagrallergymap.com. Retrieved January 21, 2022.
  10. ^ "That white cottony stuff blowing around in the air is not snow... - Family Allergy Asthma & Sinus Care". Archived from the original on 2020-10-07. Retrieved 2021-04-04.
  11. ^ a b c d e f g h Arno, Stephen F.; Hammerly, Ramona P. (2020) [1977]. Northwest Trees: Identifying & Understanding the Region's Native Trees (field guide ed.). Seattle: Mountaineers Books. pp. 196–202. ISBN 978-1-68051-329-5. OCLC 1141235469.
  12. ^ Pojar, J. & MacKinnon, A. Plants of the Pacific Northwest Coast. Vancouver, British Columbia: Lone Pine Publishing, 2004.
  13. ^ Mitchell 1996
  14. ^ Tuskan GA, Difazio S, Jansson S, Bohlmann J, Grigoriev I, Hellsten U, et al. (September 2006). "The genome of black cottonwood, Populus trichocarpa (Torr. & Gray)". Science. 313 (5793): 1596–604. Bibcode:2006Sci...313.1596T. doi:10.1126/science.1128691. PMID 16973872. S2CID 7717980.
  15. ^ Lawrence, D. H. Verfasser (2019). Sons and Loversh. ISBN 978-3-7357-7940-3. OCLC 1129762824. {{cite book}}: |first= has generic name (help)
  16. ^ Doty, S. L., Sher, A. W., Fleck, N. D., Khorasani, M., Bumgarner, R. E., Khan, Z., ... & DeLuca, T. H. (2016). Variable nitrogen fixation in wild Populus. PLOS ONE, 11(5), e0155979.
  17. ^ Yong, Ed (2012-08-10). "Tree's leaves genetically different from its roots". Nature News. Retrieved 2012-08-14.
  18. ^ Olds, Brett P.; P.J. Mulrooney; K.N. Paige (2012-08-07). "Somatic mosaicism in Populus trichocarpa leads to evolutionary change". 97th Annual Meeting of the Ecological Society of America. Portland, OR.
license
cc-by-sa-3.0
copyright
Wikipedia authors and editors
original
visit source
partner site
wikipedia EN

Populus trichocarpa: Brief Summary

provided by wikipedia EN

Populus trichocarpa, the black cottonwood, western balsam-poplar or California poplar, is a deciduous broadleaf tree species native to western North America. It is used for timber, and is notable as a model organism in plant biology.

license
cc-by-sa-3.0
copyright
Wikipedia authors and editors
original
visit source
partner site
wikipedia EN